تصميم وتصنيع وتوريد وتركيب محطة تحلية وتنقية مياه ابار سعة 1500 متر مكعب/ساعة بالسعودية

Dear / sir

technolab el-bahaa group

general.dr

bahaa badr

Good day

We are big water factory in Saudi Arabia we looking for RO plant capacity 1500 m3/ day

Our water is brackish water TDS 1100 ppm

The component for the plant :-

1 – Pretreatment ( dosing sodium hypo chlorite and sulfuric acid in our raw water tank )

2 – Feed pump and back wash pump should be Grundfose type ( the model as your design )

3 – Sand filter manual back wash

4 – Dosing for antiscallant and sodium meta bi sulphite

5 – Cartridge filter should be SS316 for 5 micron long 40 inch element ( only 1 housing )

6 – High pressure pump should be Grundfose type ( model as your design )

7 – Membrane vessel should be codeline Pinter ( number of vessel as design )

8 – Membrane elements should be fillmtec type BW30HR-44OI (number of membranes as design )

9- Post treatment ( dosing sodium hypo chlorite & caustic soda and sodium fluoride )

10 - All dosing pumps must be Prominent type capacity 7 L/ hr

11 – Dosing tank should be at least 200 L volume and PE materials

12– All valves butterfly type PVC and check valve flapper type

13– High pressure pipes must be SS 316 and the valves should be SS 316 for HPP and reject pipe

14 – We use blinding system in our plant should include in the design

15- Flushing system must be in design

16 – Flow meter for permeate & blinding and reject water and must be digital totalize

17– PH and ORP sensor for feed line and TDS electrode for product line

18– Level switch for low level raw water tank & high level product tank and low level for flushing tank

19– Control panel should have PLC Siemens type and other accessories

Thanks

Chemist /Ali Hassan

Tania Water Factory KSA

Mobile 00966503989493

السادة/ شركة تانيا لمعالجة المياه- السعودية
Date: 20th October 2012

Subject:

NEW BRACKISH WATER RO SYSTEM (62.5 cubic meter/hour) Quotation

We have the pleasure to introduce the following quotation for a reverse osmosis water treatment system to produce 62.5 Cubic Meter per Hour of pure water (400000 Gallons per Day) based on raw water TDS 1100 ppm.

Feed Pump:
• Grundfos Stainless Steel Multistage Vertical Pump. (Made In Denmark).
• 550 Gallons per Minute @ 4 Bar
• 2.5" Inlet/2.5" Out
• With low pressure switch, pressure gauges and installation kit.

Pre Treatment:

Double GPR Multi-Media Tank Filter 36"X72" with automatic backwash control head valve model Fleck® 3150 . (Made In USA)

Media Includes:

• Gravel Under-bedding

• Filter Sand
• Granular Activated Carbon (GAC)
• Flow 62.5 M3/hr
• Operating pressure 4 bars
• Port size 3"

Commercial Grade Series CGS-150K RO System:
Particulate Filter:

Stainless Steel 316 High Flow Multi-Cartridge sediment filter 3" ports with qty. 15 cartridges 5 Micron X 40" for dirt, sand, and particles. (Made In Taiwan).
•

Multi-Stage Vertical-Mount RO Booster Pump:
Grundfos 40 HP Stainless Steel Multistage Vertical Pump. (Made In Denmark)
•

• 550 Gallons Per Minute @ 18.5 Bar
• 2.5" Inlet/2.5" Out

• With pressure switch, pressure gauges and installation kit

Control Panel and Frame:
• Primary On/Off safety switch
• Liquid filled stainless steel pressure gauges (Inlet/Feed/System).
• With Inlet water shut off valve (solenoid).
• With low and high pressure switches.

• Reject regulation needle valve.
• Permeate and reject float-type, panel mounted flow-meters.
• Dual TDS Monitor for accurate feed and product TDS reading.
• PH and ORP sensor for feed line.
• High pressure pipes SS 316 and the valves SS 316 for HPP and reject pipes.

• Rust proof powder baked, heavy duty steel frame (W:600cm, D:140cm, H:170cm )

Reverse Osmosis Modules:

• Thin Film Composite (TFC) 8" Brackish Water RO Membranes made by DOW® High rejection FILMTEC® membranes (40 elements). Made In

USA.

• Fiberglass Code line membrane housing vessel 8”X200" rated at 300 PSI (8 housings).

Full Automatic Electric Control Panel:

PLC Siemens components Including contactors, overloads, time delay, indicator lamps, on/off switches and all necessary parts.

Chemical Treatment:

• Chemical Injection Dosing pump with holding tank for Anti-Scalant Solution pre-treatment. (Made In Italy) including Dosing pump, chemical tank and injection kit.

• Chemical Injection Dosing pump with holding tank for Chlorine post-treatment. (Made In Italy) including Dosing pump, chemical tank and injection kit.

• Chemical Injection Dosing pump with holding tank for sulfuric acid (Made In Italy) including Dosing pump, chemical tank and injection kit.

• Chemical Injection Dosing pump with holding tank for sodium meta bi sulphite (Made In Italy) including Dosing pump, chemical tank and injection kit.

• Chemical Injection Dosing pump with holding tank for sodium hypo chlorite (Made In Italy) including Dosing pump, chemical tank and injection kit.

• Chemical Injection Dosing pump with holding tank for caustic soda and sodium fluoride (Made In Italy) including Dosing pump, chemical tank and injection kit.

Operating conditions:
• Max. Pressure : 18.5 bar.

• Max. Temperature : 45 degree C
• pH range : 3-10
• Max. Feed TDS : 1500 ppm
• Average salt rejection : 96%
• Water chlorine content : Nil in feed
• Max. Feed water SDI : 3
• Max. Feed water turbidity: 1 NTU

Unit Price:
LE 1.500.000EGP

Should you have any questions or require any further information, please do not hesitate to call us at any time.

Yours,

technolab el-bahaa group

00201229834104

» تصميم وتصنيع وتوريد وتركيب وتشغيل محطة معالجة وتحلية وفلترة وتنقية مياه بئر جوفى سعة 6 متر مكعب/ساعة
» تصميم وتصنيع وتوريد وتركيب وتشغيل محطة معالجة وتحلية وفلترة وتنقية مياه بئر جوفى سعة 4 متر مكعب/ساعة
» تصميم وتصنيع وتوريد وتركيب محطة تنقية وتحلية مياه سعة 120متر مكعب /يوم فى توشكى
» محطة تحلية وتنقية وتطهير مياه ابار شاطئية سعة 150 متر مكعب/يوم لاستخدامات المجازر
» تصميم وتصنيع وتوريد وتركيب وحدة معالجة مياه ابار سعة 62.5متر مكعب/ساعة=400000جالون/يوم