مكونات معامل تحاليل المياه والهتدسة الصحية

Benchtop Spectrophotometer

• High-speed wavelength scanning
• Color touch screen display
• LINK2SC software (allows comparison of lab and process data)
• Chopper optics for true open measurement
• Automatic test recognition and 10-fold measurement with TNTplus chemistries

Free Residual Chlorine Analyzer
• 0 to 5 mg/L range, dual, fully-adjustable set-point alarms
• Uses the only EPA approved method for continuous chlorine monitoring
• IP62 enclosure rating, suitable for indoor installation
• Automatic, self-testing diagnostics
• Minimal routine maintenance required
• Colorimetric DPD chemistry - fast, reliable, economical
• Unattended operation up to 30 days
• Manual or automatic feed pump control

DPD Free Chlorine Reagent, 10 mL Sample
• DPD Free Chlorine Reagent Powder Pillows Pack of 1000
• USEPA accepted for reporting drinking water analysis
• Method: DPD
• Sample Size: 10 mL
• Range: up to 2.00 mg/L
• For best results use with colorimeter or spectrophotometer.

Dissolved Oxygen Probe (LDO) for BOD Measurement
• Thebod system combines od-system Digital Multi-Parameter Meter, the new Probe, a meter stand, and power and USB cables for laboratory use

. Portable Colorimeter
• The Colorimeter tests for many methods with automatic wavelength detection
• Ready-to-use out of the box
• Easy-to-use software, preprogrammed methods, and prepared reagents
• Datalogging capabilities
• Readout in concentration, ABS, and %T
• Dustproof, waterproof, shockproof, and worry free

Portable Turbidimeter
• Single-standard RapidCalTM calibration offers the simplest solution for low-level measurements.
• Single-step verification and on-screen assisted calibration eliminates the need to reference complicated manuals.
• Optional USB+Power Module enables simple data transfer. All data is easily downloaded to any computer, providing superior data integrity and availability.
• Exclusive algorithm in the Rapidly Settling TurbidityTM mode provides accurate, repeatable measurements for rapidly settling, difficult-to-measure samples while eliminating the need for redundant measurements and estimating.

Hardness Analyzer
• Measures high-range hardness using USEPA-approved calmagite chemistry
• Range 10 to 1,000 mg/L
• Accurately and continuously measures up to two sample streams
• Operates unattended for one month
• Virtually maintenance-free
• Makes your water softening system more efficient and less costly

Portable pH Meter
• pH Probes: pH, mV, temperature
Conductivity Probes: selected parameter, temperature correction, temperature
LDO Probes: dissolved oxygen, pressure, temperature
• Digital Multi-Parameter Meter offers true Plug and Play operation with IntelliCAL pH, conductivity, and dissolved oxygen (LDO) probes. Plug in any two IntelliCAL probes and get simultaneous measurement, simultaneous readout! "Smart" meters store probe serial numbers, calibration history, user ID, time, date and location of readings. Dual-Input Multi-Parameter Digital Meter (pH, Conductivity, LDO)
• Designed for use with any of pH probes
• Password-protected data for accurate, tamper proof reporting
• 500-point event log stores measurements, calibrations and check standards

Alkalinity Analyzer
• Constant protectionfast, accurate response minimizes process excursions
• Accurate alkalinity determinations to 500 mg/L as CaCO3
• Readout selectable as total or phenolphthalein
• Easy grab sample measurements without interrupting sample flow or disrupting datalogging
• Optional sample sequencing kits allow a single instrument to monitor two separate sample streams

Total Organic Carbon - Plus TOC Analyzer for Drinking Water Applications
• Intelligent software reports pass/fail status for TOC removal percentage
• Complies with Standard Methods 5310C and EPA Method 415.1
• Dual Stream sample system for source and distribution water
• Grab sample TOC analysis capability for immediate manual TOC measurements

Safe Portable Area Velocity Flow Meter
• Intrinsically Safe Flow Meter for use in hazardous or potentially hazardous environments
• For short term, single channel collection system monitoring
• Measures average velocity directly, without the need for flow profiling
• Review, Overview and Specifications for more information
•
Total Package Analyzer
• an Orbisphere 6110 total package analyzer
• an Orbisphere A1100 oxygen sensor
• All components required to operate
The Hach Orbisphere 6110 Total Package Analyzer offers easy and automatic analysis of oxygen (O2) and carbon dioxide (CO2) for the headspace and liquid in bottles/cans, without sample preparation. Use the 6110 directly at the filler. Sample analysis occurs in the container, without removing any product. Since measurement occurs in the gas phase, the 6110 eliminates maintenance such as cleaning sticky messes or bleaching tubing to prevent fouling.
• No sample preparation
• In-the-container analysis
• Operator-independent results
• Data integrity•

Autoclave - Vertical
A vertical Autoclave with a drying cycle suitable for medical / laboratory use - packs, instruments, etc. Capacity of 50 litres.

SPECIFICATIONS
MODEL RAU-530D (LS-2D)
Chamber Capacity 50 litres
Chamber size 300 mm diameter x 710 mm depth
Voltage AC110 / 220 V
Power Supply 2 kW
Designed Temperature 121 - 134آ؛C
Sterilizing Pressure 1.2 - 2.1 kg / cmآ²
Chamber Material no. 304 stainless steel
Auto Dry Function yes
Auto Add Water no
Safety Device yes
Safety Features:
- Pressure Control Switch
- Emergency Exhaust Valve
- Safety & Release Valve
- Over-heat Cut-off Switch
yes
yes
yes
yes
Standard Accessories -
Baskets
2 x half size
Net Weight 70 kg
Gross Weight 105 kg
Packaging 720 x 550 x 1210 mm (L X W X H)
Standards CE 0434
ISO 13485
ISO 9001

Series Analytical
Balances

• Multiple Weighing Units
• GLP/GMP/GCP/ISO Compliance
• ID Number
• Standard Under hook

Cabinets - Explosion Proof
The carcass consists of a sturdy sheet steel housing with impact-proof and jolt-resistant powder coating.
The robust interior is made of high-strength white plastic material (PS).
The door is lockable and supplied with a right-hand hinge as standard (but can be easily converted to a left-hand hinge). A tight door seal is ensured by an all-round magnetic gasket.
The temperature in the refrigerator can be continuously adjusted over the range +2آ°C to +12آ؛C; a room thermostat ensures constant control.


furnaces
304 Stainless steel front plate
• Powder coated mild steel housing
• Shelf
• Counter balanced door
• Kanthal A1 spiral elements
• Digital temperature controller
• Chimney (RAF models only)

Germination Growth Chamber - Low Temp

304 Stainless Steel Inner Chamber
• Powder Coated Mild Steel Outer Cabinet
• Non-Tip Shelves
• Inner Glass Door with full Peripheral Silicon Rubber Gasket
• Outer Door With Magnetic Gasket
• Fan Assisted Air Circulation
• Hermetically Sealed Compressor with Overload Protection
• Continuous or Time Controlled Illumination in Outer Door
• Dual Setpoints for Day / Night Temperature - Timer Selected
• Microprocessor Temperature Control with Digital Temperature Indicator
• 24 hr Time Clock and Timer Digital Indicaor
• Auto Over / Under Temperature Alarms
• Auto /Manual Defrost System
• Safety Thermostat According to DIN 12880 Standard


Heatable Baths
• Bath interior is made from high grade 304 stainless steel
• Two models available: Economy Heatable Bath - Model 415 or Digital Heatable Bath - Model 416.
• A hydraulic thermostat is fitted to model 415
• Digital controller fitted to model 416 with solid state relay for dynamic response
• High density mineral wool insulation for minimum heat loss
• Auxillary element fitted for rapid heat up of bath when required
• Voltage V/Hz: 230/50, Power 2000W
Hotplates

• heating block / digestor units are suitable for COD's, thermal digestions and general test tube heating applications. Digestors consist of three parts:- The electronic control unit, the heating block unit and the test tube rack if required. The remote cables between the microprocessor control unit and the heating block are 1.5m long. Control units and heating blocks are interchangeable. Heating Blocks
• Heavy duty mild steel heating top
• Suitable for continuous use
• Variable heat control via energy regulator
• Available in two sizes: Model 501- 450 x 300mm (Shipping size W x H x D, 570 x 236 x 405, 22kg) and Model 502 - 450 x 600mm (Shipping size W x H x D, 710 x 236 x 555, 31 kg)

Incubators - Humidity
Powder Coated 304 Stainless Steel Outer Housing
• 304 Stainless Steel Vapour Tight Inner Chamber
• Non-Tip Perforated Stainless Steel Shelves
• Inner Glass Door with Peripheral Silicone Gasket Seal
• Outer Door with Gasket and Latching Door Handle
• Fan Assisted Air Circulation
• Adjustable Air Vent
• Stainless Steel Reservoir and Vapour Generator
• Cooling Coil and Valve (Cooling system Optional)
• Electronic Solid State Temperature and Humidity
Controllers
• Digital Temperature and Humidity Indicators
• Adjustable Over/Under Audio/Visual Temperature
Alarms
• Cut-out Thermostat and Safety Thermostat to
DIN 12880


Magnetic Stirrer / Hot Plate
The robust construction and large 150 x 150 stainless steel top allows for loads of up to 20kg. A wrap around top with recessed control panel reduces the chance of damage to the stirrer in the event of a spillage.
Reliable, solid state electronic speed control with optical feed back ensures constant speed with load variations.
The stainless steel hot plate top of the model MSH10 is fitted with a long life incaloy heating element producing a surface temperature of up to 400°C. The temperature control is by energy regulator with a control range of 50 - 400°C

Moisture Analyser
• Fast and uniform heating with a straight halogen lamp and innovative SRA
(Secondary Radiation Assist) technology shorten measurement time
• Standard WinCT-Moisture (for MS-70 & MX-50 only) for easy analyzing mode setting
through PC and for real-time graph displaying of moisture content rate change while measuring
• Sodium Tartrate Dehydrate with its stable moisture rate comes standard for accuracy checking
• Optional temperature calibrator, calibration result can be output
• Memory function allows 20 (10 for MF-50, 5 for ML-50) suitable measurement conditions according to sample and 100 (50 for MF-50, 30 for ML-50) measurement result data storage and outputs
• Four choices of measurement programs, Standard, Automatic Complete, Timer, and
Manual Mode are selectable
• Clear and easy-to-see, large VFD display shows measurement, setting value, change
in moisture content, action status, data number and other important information
• Low maintenance cost assured, thanks to user replaceable halogen lamp
without unit downtime with protective chamber for easy clean
• Progress window for heating check
• "Quick Mode" in the measurement program for drying the sample faster
by heating the sample at 200آ°C for 3 minutes.
• Self check function
• Conformity to GLP,GMP,GCP and ISO with date /time ,ID calibration data and check record outputs


Ovens - Digital
• Supplied with two chrome plated shelves
• Temperature control via PID electronic control with digital indication of process and setpoint temperature values
• Control range ambient +10؛C to 250؛C
• Fitted with solid state relay for dynamic response
• Control accuracy approx. 0.3؛C
• Circulation fan
• Hydraulic safety thermostat

Ovens - Glassware Drying
The glassware drying oven is made entirely from stainless steel 304, and is heated by sheathed incoloy electrical elements.The unit is fitted with 2 (two) large chromium plated wire mesh racks and features glass sliding doors front and back.The temperature is adjustable by means of a Rheostat. A pilot light is fitted. The unit is supplied with a cable and plug.

Shaker - Orbital Platform
• Micro processor based speed control with easy-to-use rpm setting and digital indication of speed
• Unit supplied complete with platform and 4 clamping bars with rubber mat insertion on platform
• Platform size model 261 400mm x 300mm; Shipping size: 500 W x 325 H x 435 D mm; 16 kg
• Platform size model 262 600mm x 480mm; Shipping size: 700 W x 431 H x 610 D mm; 34 kg
• 120 minute timer with infinity setting
• Voltage: 230 / 50 Hz
• Power: 120W

Shakers - Flask Series
A brushless external rotor type motor ensures a continuous duty cycle with low maintenance.
Infinitely variable solid state electronic feed back speed control (50-800 oscillations/ min), with digital speed indicator provides for stable, repeatable speed settings

Thermometer - waterproof
• Housed in a robust extruded aluminium waterproof case offering IP66 /67 protection.
• Range of -49.9 to 299.9°C with a 0.1% resolution.
• Large, easy-to-read LCD display with open circuit and low battery indication.
• Powered by a 9 volt battery which gives the thermometer approximately 5 000 hours of continuous use.
• Also available with re-chargeable battery option. (Please request this in comments section if you want this).
• The on/off button is conveniently located at the front of the instrument, as is the display hold facility.
• Supplied with a hand-held, water resistant, permanently attached penetration probe with a diameter 3.3 x 130 mm stainless steel stem and one metre PU coiled lead. The probe is both strong and versatile and suitable for a variety of applications including liquids, semi-solids and granular materials.
• Available with colour-coded rubber bumper seals to help avoid cross-contamination.



Water Distillation Apparatus
Waterstills are robustly constructed from 304 Stainless Steel ensuring a long service life. The exterior is finished in a durable chemical resistant coat with a textured finish. Corrosion resistant incaloy sheathed heating elements of a low wattage density ensure long element life.
All Waterstills are fitted with a preset safety cut out thermostat. This safety device protects the elements and chamber from possible damage in the event of water failure.

Water Bath
The interior of the Waterbaths is made from high grade 304 stainless steel. They accommodate standard immersion thermostats, height adjusters and lids.

Waterproof TRACER PockeTester™ • Salt, TDS & Temp

This test meter measures salt, TDS and temperature and was designed for the pool professional or the quality-minded homeowner.. The tester’s probe is dipped into a sample of pool water and the results are ready instantly

RAE Systems MULTIRAEPLUS
The RAE-MultiRAE Plus is a compact 5-gas monitor that combines a Photo Infrared Detector
(PID) with O2, LEL and 2 plug-in "smart" toxic gas sensors: CO, H2S, SO2, NO,
NO2, CI2, HCN, NH3, or PH3.

0-2,000 ppm measurement of Volatile Organic Compounds (VOCs) with 0.1 ppm
resolution.
Thermo Electron
Indoor air quality monitoring

5-Gas Monitor with VOC Detection
Personal Dataram (pdr) measures airborne particulates concentration in
real time, storing this information in detail for subsequent retrieval/printout/graphing
through a computer. Range: 0.001 to 400 mg/m3

(DO), and ORP. Thermo Electron Corp
Portable Water Analysis Meter Kit

The Orion 5-STAR hand held meter measures pH, Conductivity, Dissolved Oxygen

Universal Centrifuge
The Z300 centrifuge has a maximum speed of 13 500rpm and a maximum RCF of 17 320 x g | Accommodates various rotors for tubes up to 100ml


Density Meter
Density meter with temperature control with electronic cooling and heating 0 - 90°C | Full range viscosity correction reference oscillator | Video View for easy bubble detection | GMP/GLP Compliant | Range 0 - 3g/cm3 | Accuracy Density 0.0001g/cm3 | Temperature 0.05°C

HPLCBinary Gradient System 4
Binary Analytical System consisting of 2 x CE 4100 | Solvent pump | CE 4200 UV detector | Dual wavelength programmable | Complete with air test cell | With 8

Ion selective electrode
Ion-selective indicator electrode with fixed cable specific for one of the following ions: Ammonium (NH4+) | Bromide (Br-) | Calcium (Ca2+)| Chloride (Cl-) | Copper (Cu2+) | Cyanide (CN-) | Fluoride (F-) | Nitrate (NO3-) | Nitrite (NO2-) | Potassium (K+) | Silver/Sulphide (Ag+/S2-) | Sodium (Na+)

Electrolyte for all 14 Ion-Selective Electrodes

Benchtop + Series Conductivity Cel
For Universal Use, Low Conductivity, High Conductivity and Difficult Media.
l
COD Set
The SC400 COD Set comes complete with everything you need for COD Analysis

aboratory microscope
is an instrument to see objects too small for the naked eye. The science of investigating small objects using such an instrument is called microscopy. Microscopic means invisible to the eye unless aided by a microscope. l
Heavy metals measures
For pb/fe/cu/mn measurment