3000-4000B/H 500mL（PET）bottled water production/ خط انتاج مياه معدنية اتوماتيك كامل قدرة 4000 زجاجة / ساعة سعة 500 مل

3000-4000B/H 500mL（PET）bottled water production

by
technolab el-bahaa group

general.dr
bahaa badr

quotation

NO Equipment Model Quantity/set FOB/USD

1 Water treatment

(3T) WT-RO-3T/H 1

2 Water

storage tank W-S-T-3 2

3 Ozone generator CFZY-9 1

4 Air conveyor 2m,

Straight conveyor 12m, blower 2sets, power head

1set and pipes SG-1 free+1395

+465+434+480

5 Washing, filling

and capping

(Three-in-one) WT-12-12-5 1

6 Air

drying machine HG-2 1

7 Light check LC-1 1 100

8 Automatic sleeve

Labeling machine ESAY-2000 1

9 Automatic ink-jet

printer GM-2000G 1

10 Automatic

packing machine QSJ-5040A 1

Total: 126,621.00 USD

Main machines

1, WT-RO-3T/H type RO pure water treatment plant

Description:

Model WT-RO-3T/H

Capacity 3000LPH

Power supply AC220V / AC380V / 415V±5% 50HZ / 60HZ

RO stage According to client's demands

Desalt rate 99%

Operation pressure 0.7-1.5Mpa

PH of raw water 2-11

Conductivity of raw water 1000US/CM

RO Pure water treatment plant is for producing drinking water, foods factory, beverage factory, fruit& vegetable factory etc.

The machine is integrated into a group, the assembly and transportation are rather convenient.

It's simply operation and has long lifespan.

Main components: RO membrane (Hydecanme)
,
High pressure pump (Nanfang. China)

Electricity conduction meter

Over high or over low pressure protection facilities

304 Stainless steel
.
Suitable for investment for mid-scale enterprises

The standard of supplied water

Electricity conduction rate: Nor more than 10us/cm

Bacteria no.: Not more than 20

Voltage: 380V, 50HZ

Power: 6.5kw

Installation:

Raw water pump + silica sand filter +active carbon filter +softener + micron filter +

high pressure pump + RO system.

Plant process:

1. Raw water pump-- provide the pressure to silica sand filter/ active carbon filter

2. Silica Sand filter-- get rid of turbidity, suspended matter, organic matter, colloid and so on

3. Active Carbon filter--Remove the color, free chloride, organic matter, harmful matter and so on

4, Softener--reduce the hardness of water

4. Micron filter--prevent any deposition of large Particles, most of the bacteria, and

viruses into the RO membrane, The accuracy is 5um, for holding back any large particulates such as large iron, dust, suspended matter, impurity.

5. High pressure pump-- Provide the high pressure to RO membrane (at least 2.0 M pa).

6. RO system--RO system is the main part of pure water treatment plant.

The RO membrane's desalt rate can reach as high as 99%, it is capable of removing over 99% of ions, bacteria, particles and 98% of organic.

-------------------------------------------------------------------------------------------------------
2, Water storage tank (2 sets)
You need to take two stainless steel tanks for storing raw water and output pure water.
Aseptic Stain-Less Steel Water Tank

Applies 304 stainless steel as material.

Polish treatment applied to inner and outer surface of tank. All connection points adopt annular rolling and annular welding;

Avoid angle welding;

Without any dead corner. Easy to clean. Equipped with entry hole for man and air-filter.

Tank volume ranges from 1.0 to 10.0T. （if you needn’t, you should prepare these by yourself ）

-------------------------------------------------------------------------------------------------------
3, Ozone generator

The output water should be sterilized by ozone to keep long time in fresh, the capacity
of ozone generator with capacity in 9 gram per hour is fit for 3000LPH pure water treatment plant.

CFZY-9 ozone generator

Ozone generating capacity: 9g/h

Gas source: air

Power supply: 220V50Hz

Power: 650W

N.W: 55kg

Size: 500*420*870

Introduction:

CFZY-9 ozone generator take air as gas source, with oxygen generator
and compressor inside (dispense with oxygen bottle & air handling system).

It can be initiated and produce ozone as soon as being electrified.

Steady capability, ozone capacity with no changes by environment, low noise easy to install and easy to operate The best applicable environmental condition:

Air temperature ≤25℃ Relative humidity ≤70.
-----------------------------------------------------------------------------------------------------------------------------------------

4, Air conveyor (wind tunnel)

5, Three-in-one washing, filling and capping machine for PET bottles

 Model: WT-12-12-5

 Capacity: 3000-4000bph

 Total power: 2.2KW

 Transmit way: blow by wind

 Overall dimension: 2500×2100×2200

 Bottleneck suspension type: Germany Krone technology

 Weight: 2T

 Material: Stainless steel 304

 Washing supply pressure: 0.2-0.25Mpa

 Air supply pressure: 0.7MPa

 Bottle size: PET,200ml-2L

Bottle diameter Φ50mm—Φ96mm

Bottle height 150mm—310mm

Speed regulation Frequency control of motor speed

6, Light checking device

This light checking device (Lamp checking case) is used for checking the sundries in the bottles and etc when process beverage after filling by beverage manufacturer.

It is the necessary process before labeling. It is also an absolutely necessary checking instrument under GMP regulations.

This machine is novelty, simple with low broken-up rate, low labor work, high efficiency and easy operation.

Main Technical Parameter:

 Suitable bottle specification: Diameter16 * 35

 Power: 0.6KW

 Lamp Power: 18W

7, Air Drying machine (HG-2(2 meter))

 Model: HG-2

 Overall dimension: 2000 mm*70*1650

 Material: Stainless steel 304

 Total power: 2.2KW

 Usage: Used to dry the finished product on the bottle water so as to easy to sleeve
the labels.

8, Automatic sleeve labeling machine

The standard length of label is 100mm and the speed can be adjusted accord to customers’ requirements.

The speed will be faster if the label is shorter.

Specification

 Model: ESAY-2000

 Overall dimension: 2440×900×2150mm

 Label size: φ30~125mm

 Label length: 30~250mm

 Label material: PVC/PET/OPS

 Total power: 2.5KW（380V，50HZ）

 Weight: 600Kg

9, Automatic ink-jet printer machine

GM-2000G inkjet printer can print up to three lines of fonts and can also be integrated into high-speed production lines.

Its functions and performances have reached that of international standards of the same category.

Automatic ink viscosity measuring and control, fault alarm indicator and automatic hydraulic system cleaning can combine to ensure the continuous stable operation of this system.
GM-2000G is capable of creating a wide range of graphics, languages, numbers and characters.

Users can select different high-quality and high-speed printing modes according to their own needs.

The RS232 portal provides GM-2000C with the access to a computer or network by means of own software.
Specification:

 Model ：GM-2000G

 range 7*5, 7*9,10*7,16*16,16*24,24*24

 print lines Max 3(7*5)

 letter height 1.5-15mm

 pray speed 2000 characters/second(7*5 single line)

 voltage 110-220v/50-60hz

 dimension 420*210*600mm

 Package: wooden case

 Material: stainless steel

 weight 35Kg

------------------------------------------------------------------------------------------------------------------------------------------

10, Automatic packing machine

 the max size of the packing goods(mm): 240ⅹ195ⅹ210(L.W.H)

 packing speed : 10-12b/min

 external dimension(mm) : 2970ⅹ1320ⅹ1926(L.W.H)

 the max power of the whole machine: 1KW

 electric source(attention) :AC 220V±5V 50HZ

 rated electric current: 6A

 air supply pressure: 0.6-0.7Mpa

 Attention: the electric source of this machine should be connected with low mouth
of stable electric source AC220V 3000W.

In addition:

 Delivery Term:ex-work

 Delivery Time: 45 days according to electrical

 Package: Wooden Case

 Payment Terms: T/T (70%deposit and 30%payment before shipment)

 Installation team: 2 technicians for 10 days. The labor salary for each

 Technician is $45/day. Flight tickets, hotel and dinner fee are all at buyer’s
account.

 Training: Training to the local operator to be carried out by the supplier at the time of installation/ commissioning/ trial run at factory.
 Warranty: One year from the date of completion of the commissioning