ماكينة نفخ البيرفورم لتصنيع زجاجات مياه معدنية سعات 200/300/600/1500 مل صينى بمكونات اوروبية تحت اشراف مجموعة تكنولاب البهاء جروب

Full automatic bottle blowing machine

fully-automatic blow moulding machine, container volume 100ml -- 1500ml, producing per hour for 4000pcs, (the speed is for the 500ml bottles)

IT Include one blower and one loader, air compressor ( High pressure and Low pressure ) , HP air tank, Air dryer, Water chiller, blow mould .

you need use 4 sets machines to produce 15,000 Bottles per hour.

please check the work video of machine.

1. Features:

1.Stable performance with advanced PLC.

2.Conveying preforms automatically with conveyor.

3.Strong penetrability and good and swift distribution of the heat by letting the bottles rotate by itself and revolute in the rails simultaneously in the infrared preheater.

4.High adjustability to enable the preheater to preheat preforms in shapes by adjusting the light tube and the length of the reflecting board in the preheating area, and eternal temperature in the preheater with an automatic thermostatic apparatus.

5.High safeties with security automatic-locking apparatus in each mechanical action, which will make the procedures turn into a state of safety in case of a breakdown in certain procedure.

6.No contamination and low noise with the air cylinder to drive the action instead of the oil pump.

7.Satisfaction with different atmospheric pressure for blowing and mechanical action by dividing the blowing and action into three parts in the air pressure diagram of the machine.

8.Strong clamping force with high pressure and double crank links to lock the mold.

9.Two ways of operating: automatic and manual.

10.Safe, reliable, and unique design of the position of valve to make the air pressure diagram of the machine easier to understand.

11.Low cost, high efficiency, easy operation, easy maintenance, etc, with automatic technological process.

12.Contamination is avoided for the bottle body.

13.Ideal effect of the chilling with the chilling system.

14.Easy installation and starting

15.Low rejection rate: less than 0.2 percent.

3. Technical parameter

ITEM UNIT BX-S4-A

CONTAINER Max.container volume L 1.5

Max.neck outer diameter mm 40

Max.container diameter mm 105

Max.container height mm 350

Number of cavity pcs 4

Theoretical output bph 3400-4000

ELECTRICAL Max.heating power kw 54

Installed power kw 56

COMPRESSED AIR Operating pressure Mpa 0.7

Low pressure air consuming L/min 2000

Blowing pressure Mpa ≤3.5

High pressure air consuming L/min 3000-400

CHILLER WATER Pressure Mpa 0.3-0.5

Temperature ℃ 10-12

Flow rate L/min 20-30

MACHINE DIMENSION Size(L*W*H) m 3.7×2.2×2.3

Weight kg 3800

HP Air Compressor Air tank Air Filter Air Dryer Air Filter LP Compressor Water chiller

Preform Full Automatic Blow Molding Machine PET bottle

5. Price list of all above machines

Model name Spec. Qty. Unit(USD) Amount(USD) Note

Full automatic bottle blowing Machine BX-S4-A 1 57,000 57,000 One blower and one loader(42kw)

High pressure air compressor 2.4m³/min 30kg 1 6,500 6,500
SHANGAIR OR HENGDA For blowing(2x15kw)

Low pressure air compressor 2.0m³/min 10kg 1 4,500 4,500 SHANGAIR OR HENGDA For machine running(15kw)

HP air tank 0.6 m³/min 30kg 1 3,000 3,000 For storing compressed air

Air dryer 3.0m³/min 30kg 1 3,400 3,400 with 2 air filters(0.75kw)

Water chiller 3HP 1 3,500 3,500 air cooled (3.25kw)

Mould
4 cavity 220ml 1 4,000 4,000 The mold material is 7075，aluminum alloy.

300ml 1 4,000 4,000
600ml 1 4,100 4,100
1500ml 1 4,900 4,900

Total FOB NING BO PORT 93900 /SET

this price for air compressor, air dryer, and water chiller is just for 220V or 380V, if the voltage is different, you should add 5% on the price above.

6. Main parts list:

Model name Brand and origin

PLC MITSUBISHI(Japan)

Blowing valve PARKER(Switzerland)

Acting valve YSC(Korea)

Cylinder MOHE, Festo (Germany)

Silencer SMC(Japan)

Photoelectrical switch Korea

Fan Germany

Pressure gauge AIRTAC(Taiwan)
---------------------------------------------------------------------------

7.Free spare parts list:

No. Name Qty Unit
1 Stretch cylinder seal 1 set
2 Mould-close cylinder Seal 1 set
3 Step cylinder seal 1 set
4 Voltage regulating gauge 1 pcs
5 Lamps 10 pcs
6 Preform holder 1 pcs
7 Clamping tool 1 set
8 Seal washer 5 pcs
9 Foot 6 pcs
10 joints 15 pcs
11 Electric checking switch 1 pcs
12 Fan 1 pcs
13 Voltage mode 1 pcs
14 Magnetic valve 1 pcs

-------------------------------------------------------------------------------

7. Note

1. All the above prices are quoted on FOB Ningbo basis.

2013-2-28 exchange 1$ = ￥6.20, as the US$ against RMB¥ exchange fall, this price

effective time for 30 days, to be adjustment as the market changes .

2.Payment terms: 70% deposit by T/T in advance, 30% before shipment.

3.Delivery time: within 35 days after the confirmation of the mold drawings.

4.Guarantee period: one year.

We can send an engineer to your country and test run the machines till it can work normally upon .

( training time :10--20days) The buyer shall bear all the charges involved, charges including round-trip airfare, visa fee, accommodation, and insurance, etc. (the subsidy of engineer is USD 100 per day)

[img]

ماكينة نفخ البيرفورم لتصنيع زجاجات مياه معدنية سعات 200/300/600/1500 مل صينى بمكونات اوروبية تحت اشراف مجموعة تكنولاب البهاء جروب Uoo110

[/img]

[img]

ماكينة نفخ البيرفورم لتصنيع زجاجات مياه معدنية سعات 200/300/600/1500 مل صينى بمكونات اوروبية تحت اشراف مجموعة تكنولاب البهاء جروب Mm10

[/img]

https://www.facebook.com/n/?video%2Feditvideo.php&v=10151480871482505&mid=799b74dG31e97168G129d3970G3d&bcode=1.1362082336.AbkRE-4GTACMohry&n_m=bahaa67%40yahoo.com

» شركة بريستول تو ايه للكيماويات -احد مصانع مجموعة تكنولاب البهاء جروب - لتصنيع مياه الرادياتير/مياه البطاريات/مياه مقطرة/زيت باكم/زيت فرامل/زيوت محركات/
» تصميم وتصنيع وتركيب وتشغيل وحدة تحلية مياه قدرة 500 متر مكعب/يوم من انتاج شركة رواد مصر تحت اشراف مجموعة تكنولاب البهاء جروب فى شرم الشيخ
» توريد السولار من سنغافورة الى الاردن تحت اشراف وتحليل مجموعة تكنولاب البهاء جروب
» تحضير وتركيب وتصنيع مياه رادياتير للسيارات
» انتاج الكربون النشط من اشجار البرتقال والمانجو 2017 لاول مره فى مصر باستخدام افران الكربنه والتجفيف تحت اشراف مجموعة تكنولاب البهاء جروب