شهادات الامان والجودة لبولى الومونيوم كلوريد

MATERIAL SAFETY DATA SHEET
MSDS

PRODUCT NAME:
PAC
POLY ALUMINIUM CHLORIDE

Description of POLY-ALUMINIUM CHLORIDE (PAC)
Formula of Poly-aluminium chloride (PAC):
[Al(OH)nCl6-n]m

F.W. of Poly-aluminium chloride (PAC): Nill

CAS no. of Poly-aluminium chloride (PAC): 1327-41-9

DOT of Poly-aluminium chloride (PAC): 8/II

NFPA no. of Poly-aluminium chloride (PAC): Nill

Class no.of Poly-aluminium chloride (PAC): 8

UN no. of Poly-aluminium chloride (PAC): 1760

HS code of Poly-aluminium chloride (PAC): 2827.3200

Specific Gravity of Poly-aluminium chloride (PAC): Nill


Poly-aluminium chloride (PAC) is a kind of high efficiency inorganic highmolecular coagulant.
Poly-aluminium chloride (PAC)
is the product between AlCl3 and Al(OH)3.

1. Quick moulding, good activity and good fitrabilitiy.

2. Alkalescence auxiliaries are not necessary.

3. Wide adaptive PH value and wide use.

4. Little salt content in the water treated.

5. Can remove the pollution of heavy metal and radioactive substance.

6. High active ingredients, convenient for storage and transportation.







Specification of :
POLY-ALUMINIUM CHLORIDE (PAC)
Items Liquid Solid(best quality) Solid(first quality) Note
Aluminium oxide (Al2O3),% 10 MIN 30 MIN 28 MIN Liquid Solid
Basicity B 50 MIN 40-90 40-90 Appearance Appearance
PH value 3.5-5.0 1% liquid
5 MIN 1% liquid
5 MIN Yellow milkiness Yellow powder
Plumbum(Pb), PPM 2 MAX 5 MAX 12 MAX
Chrome (Cr+6), PPM 2 MAX 4 MAX 4 MAX
Arsenic (As), PPM 0 0 0
Cadmium (Cd), PPM 0 0 0
Mercury (Hg), PPM 0 0 0
Insoluble substance in water, % 0.2-0.5 MAX 0.5 MAX 1.0 MAX
Other injurious substances In accordance with national standard In accordance with national standard In accordance with national standard






Application of:
POLY-ALUMINIUM CHLORIDE (PAC)
Poly Aluminium Chloride is an Aluminium based coagulant used in water treatment, paper sizing and affluent treatment.

Poly-aluminium chloride (PAC) is an inorganic chemical having polymeric structure and is soluble in water.

Poly-aluminium chloride (PAC) has wide uses in purifying water, e.g.:

Poly-aluminium chloride (PAC) is used in purify drinking water, domestic wastewater.

Poly-aluminium chloride (PAC) is used in purify industrial water,industrial waste, recirculated water etc..

Poly-aluminium chloride (PAC) is used in paper making, dyeing and bleaching, cement hardener, hardener, bond, glycerin refinement, sugar solution refinement etc...

Poly-aluminium chloride (PAC) is used in oilwater separation in oil refining industry.

Packing&Storage of:
POLY-ALUMINIUM CHLORIDE (PAC)
Packing of Poly-aluminium chloride (PAC):
plastic woven bag lined with plastic film bag, net weight: 25kg/bag; or according to the clients' requirements;

Storage of Poly-aluminium chloride (PAC):

1)not to pack, transport and store together with toxic matters, keep away from water and moisture, not to damage package;
do small-scale test according to the quality of water before using and decide the optimal point to achieve excellent water purifying effect and low use level; prepare solution just before using and not to place it for more than 24 hours; according to the practical situation to decide the use level for non-drinking water;

2)if using solid product, first add 10-15 times of water to dissolve, then add water to dilute to needed concentration; slowly add material into water and continuously mix when dissolving,.

3)if using liquid product, add water to dilute to needed concentration.

4)Store in a cool place out of direct sunlight. Store in well ventilated area. Store away from oxidizing agents and foodstuffs. 5)Prevent severe overheating as overheating may produce hydrogen chloride gas.

MSDS of :
POLY-ALUMINIUM CHLORIDE (PAC)
Material Safety Data Sheets of
Poly-aluminium chloride (PAC)

IDENTIFICATION

TRADE NAME : Poly Aluminium Chloride

OTHER NAMES : PAC Solid; Poly Aluminium Chloride Solid

USES : Water treatment chemical.
PHYSICAL DESCRIPTION/ PROPERTIES

Appearance, odour : Pale, yellow, hydroscopic powder.

Melting Point : Not Available

Boiling Point : Not Available

Bulk Density : 0.65 g/cm3

Vapour Density (air=1) : Not Available

Vapour Pressure (20degree C) : Not Available

Flash Point (Closed cup) : Not Available

Flammability Limits (%) : Not Available

Autoignition Temp (degree C) : Not Available

pH (1% Solution w/v) : 3.5 - 5.0

Solubility in water (g/L) : Soluble

INGREDIENTS

Chemical Name CAS Number Proportion

Poly Aluminium Chloride 1327-41-9 >99%

HEALTH HAZARD INFORMATION

HEALTH EFFECTS

No adverse health effects expected if the product is handled in accordance with this Safety Data Sheet and the product label.
Symptoms that may arise if the product is mishandled are:
ACUTE EFFECTS –

SWALLOWED: May cause nausea, vomiting and respiratory irritation.

EYE: May cause eye irritation.

SKIN: May cause irritation with prolonged contact.

INHALED: May irritate the mucous membranes.

CHRONIC EFFECTS: NO KNOWN EFFECTS.

FIRST AID

SWALLOWED: Give water to drink. Do not induce vomiting. Seek immediate medical attention.

EYE:
Immediately irrigate with copious quantities of water for at least 15 minutes. Eyelids to be held open. Seek medical advice.

SKIN:
Wash with soap & water. Remove contaminated clothing, launder clothes before reuse. If irritation persists seek medical advice.

INHALED:
Remove to fresh air. Seek medical attention if irritation persists.
ADVICE TO DOCTOR
Treat symptomatically.

TOXICITY

No TOXIC MATTER

PRECAUTIONS FOR USE

EXPOSURE STANDARDS

No value assigned for this specific material by the National Occupational Health and Safety Commission (Worksafe Australia).
ENGINEERING CONTROLS
Use in a well-ventilated area. Local exhaust ventilation is recommended.
PERSONAL PROTECTION

Avoid skin and eye contact and inhalation of dust. Wear overalls, eye protection & gloves. Respiratory protection is required in dusty environment. Use an approved dust mask. Use with adequate ventilation. Always wash hands before smoking, eating, drinking or using the toilet.
FLAMMABILITY

Not flammable
SAFE HANDLING INFORMATION

STORAGE AND TRANSPORT

Not defined as a Dangerous Good by the Australian Code for the Transport of Dangerous Goods by Road and Rail.
Store in a cool place out of direct sunlight. Store in well ventilated area. Store away from oxidizing agents and foodstuffs. Prevent severe overheating as overheating may produce hydrogen chloride gas.
SPILLS

Wear protective equipment to prevent skin and eye contamination and inhalation of dust. Sweep up but avoid generating dust. Collect and place in properly labelled containers for disposal. Residues may be flushed to drain with large amounts of water if permitted.

DISPOSAL

Refer to State Land Waste Management Authority.
FIRE/EXPLOSION HAZARDS

Material is non flammable. On burning will emit fumes. Fire fighters to wear self-contained breathing apparatus if risk of exposure to vapour or products of combustion.
EXTINGUISHING MEDIA:
Water spray, foam, dry agent (carbon dioxide, dry chemical powder).
. Stability & Reactivity.
Stability Stable under normal conditions.
Materials to avoid Strong alkalis, chlorites, hypochlorites, sulphites, cyanides and sulphides. Most metal surfaces (eg galvanised surfaces, aluminium, copper, zinc and their alloys).
Hazardous decomposition products Oxides of sulphur, Hydrogen chloride - if heated above 200°C or boiled to dryness.

Toxicological Information.
Effects There is no toxicological data available on this product. PAC solutions are not believed to have any significant toxic properties.

Ecological Information.
Environmental Effects On contact with water, PAC will hydrolyse to give dilute hydrochloric acid and gelatinous aluminium hydroxide. Discharge to the aquatic environment should be avoided since it may lead to localized adverse conditions arising from the chemical and physical properties. Clogging of tentacles, gills and filters of suspension feeders and the modification of photosynthesis of algae and plankton may result from the suspended particles and turbidity produced.

Exposure Controls/personal protection.
Exposure Limits 2 mg Al/m
3, 8h TWA
Type OES

Monitoring Method as soluble aluminium salts

Protective Measures
Respiratory:
Type approved RPE for mists if required.

Hand: PVC or rubber gloves.

Eye: Chemical goggles.

Skin: Overalls, PVC or rubber apron, boots.
Hygiene Measures Always wash thoroughly after handling chemicals.
POLY-ALUMINIUM CHLORIDE (PAC) raw mateiral
1) Aluminium & aluminium chloride
2) Aluminium hydroxide & hydrochloric acid
3) Aluminium sulfate & calcium hydroxide

POLY-ALUMINIUM CHLORIDE (PAC) end goods
Sucralfate

Substitute of POLY-ALUMINIUM CHLORIDE (PAC)
Other goods can be used in water treatment industry

Importing & exporting rules of POLY-ALUMINIUM CHLORIDE (PAC)
Normal




THANKS FOR REGARDING

TECHNOLAB EL-BAHAA GROUP

EGYPT

COLONEL.DR
BAHAA BADR EL-DIN

WATER TREATMENT CONSULTANT

WWW.TECHNOLABELBAHAAGP.GOOGOOLZ.COM
WWW.HOME.COMCAST.NET/~BAHAA67/SITE

TECHNOLABELBAHAAGP@GMAIL.COM
TECHNOLABELBAHAAGP@YAHOO.COM
TECHNOLABELBAHAAGP@LIVE.COM
TECHNOLABELBAHAAGP@HOTMAIL.COM

002-0117156569
002-0129834104
002-0163793775